CASE CAB ENCLOSURE | PRO-SERIES | 410-450 MODELS

Listed by SkidSteerCabs.com, LLC

This item is available in multiple configurations (for example, different machine sub-models), which can carry different prices. The price shown reflects the lowest available option -- confirm the exact price and fit for your machine with the seller before ordering. Case 410-465 Pro-Series Cab Enclosure Close in an open Case skid steer with a formed 1/2-inch Lexan polycarbonate front door, locking hardware, seals, and the parts needed for an aftermarket retrofit. Choose Door Only for the front assembly or Door + Side Windows for the same door with fitted stationary side panels. The series and model group are separate ordering requirements. Match both to the machine before selecting the kit. Current series and model choices - Series 1 and 2: 410, 420, 430, or 440. - Series 1 and 2: 435, 445, 450, or 465. - Series 3: 410, 420, 430, or 440. Those are the exact groups in SSC's current purchase options. Is the machine marked CT, or is the series missing from the model decal? Does the cab already have factory hinges, sensors, wiring, or a door frame? Send the model, series, serial number, and front-cab photos through our contact page before ordering when the layout is unclear. Door Only or Door + Side Windows - Formed 1/2-inch Lexan polycarbonate front door. - Locking exterior handle and keys, interior pull, hinges, latch, striker, thresholds, perimeter seal, fasteners, and related mounting parts. - Stationary polycarbonate side panels with their seals and mounting hardware when Door + Side Windows is selected. The side panels do not slide. A roof panel and rear window are not included with either standard option. Compare other Case enclosure systems when the machine falls outside these three groups. Retrofit installation This kit is for an open cab and is not a replacement panel for intact OEM door hardware. Existing factory or aftermarket framing may need to be removed. Installation requires locating and drilling hinge holes and may require additional holes for the thresholds and striker; the specified drill and tap are supplied. Dry-fit the door, align the hinges, and adjust the striker before final tightening. Check that the latch closes without twisting the panel and that the seal contacts the opening evenly. Review the Pro-Series installation guide before starting. Frequently asked questions Does Series 3 use the same option as Series 1 or 2? No. Series 3 has its own 410/420/430/440 selection. Do the optional side windows open? No. Door + Side Windows adds stationary panels that bolt into place. Can the kit reuse an OEM door frame? Do not assume so. This retrofit is intended for an open cab; send photos first if factory door components remain.

Primary fitment

case Model not verified

Location

Frostburg, MD